Sawing

Hand Held Sawing

Hand held sawing is commonly employed when general wall and floor sawing cannot be applied. Hand held units are as the name suggests with a circular diamond blade, they provide a relatively quick and portable solution with minimal overcut.

Our hand held units come in a range of:

With a general cutting depth of 150mm deep and a maximum depth of 260mm deep. Our standard width of blade is 3mm, and on application we can produce 6mm.

Some examples of Applications Include:

Track Mounted Wall Sawing

We utilise the very best quality high performance wall saw units with production guaranteed!

Wall sawing employs a circular blade on a track mounted machine. The track is attached to vertical walls or steep inclines or floors that will not permit the use of conventional concrete saws.

Wall sawing is typically specified to cut precise dimensional doorways, vent and window openings. Straight and bevel cuts are possible with the wall saw.

Our Wall saw units are 3Phase High Frequency Electric & Electric-Hydraulic Powered and require a Clipsal 32amp 4 pin outlet. With a maximum depth of 715mm deep from one side, cutting from both sides of a wall gives a total depth of 1.43m deep.

These units are so versatile the applications are inexhaustible.

Some examples other than standard methods are:

Some examples of Applications Include:

Floor & Road Sawing

Floor Sawing is typically specified to cut horizontal surfaces such as floors, bridge decks, expansion joints and pavement.

Our Floor Saw Units come in a range of:

With a general cutting depth of 400mm deep, on application we also offer specialised cuts of up to 600mm deep. Our standard width of blade is 3.5mm, and on application we can produce up to 18mm wide. Chases up to 50mm wide.

Some examples of Applications Include: